Water Treatment Solutions for Water You Can Trust

A softener can handle small amounts of dissolved iron. Higher levels usually call for a dedicated iron filter, and too much iron can damage a softener over time.

Sometimes, but many homes get the best results from a combination, like a softener for the whole house and reverse osmosis for drinking water. A water test shows exactly what you need.

If you see scale buildup, spots on dishes, or soap that won’t lather, you likely have hard water, which is common across much of the Midwest. A softener removes the minerals that cause hard water and helps protect your pipes and appliances.

Some water goes down the drain to rinse away what the membrane filters out. Newer systems are much more efficient than older models, and we’ll help you pick one that fits your household.

Look for orange or reddish-brown stains in sinks, tubs, toilets, and laundry. Other signs include a metallic taste and water that turns cloudy or orange after sitting.

Start with a water test. It shows what’s in your water, so you get a system that solves your actual problems instead of guessing.

Most iron filters convert dissolved iron into particles and then trap them in a filter bed. Most clean themselves automatically on a regular cycle.

If you’re on a private well, test at least once a year. On city water, test whenever you notice a change in taste, smell, or color, or before you choose a treatment system.

Your city’s water report reflects water leaving the treatment plant, not what comes out of your faucet. Older pipes and plumbing in your home can change your water along the way.

At typical levels, iron isn’t considered a health risk. It does stain fixtures and clothes, clogs pipes and appliances, and can feed iron bacteria.

City water is treated to meet EPA standards when it leaves the plant. On the way to your tap it can still pick up things like lead from older pipes, and many homeowners notice a chlorine taste or smell. A purification system adds a final layer of protection right where you use the water.

Common signs include white spots or scale on fixtures, orange or brown stains, a chlorine or rotten-egg smell, cloudy water, and dry skin or dull hair after showering.

It depends on the system. Purification can reduce chlorine, lead, sediment, and dissolved solids. We’ll match the system to what’s actually in your water.

It’s usually hydrogen sulfide gas, which is common in well water. It can also come from a reaction inside your water heater. A technician can pinpoint the source and recommend the right fix.

A reverse osmosis system pushes water through a very fine membrane that reduces dissolved solids and contaminants like lead, arsenic, nitrates, and fluoride. Many systems also reduce PFAS. Exactly what a system removes depends on its certification, so we’ll show you what yours is rated for before it goes in.

In-home tests commonly check things like hardness, iron, pH, and total dissolved solids. Some contaminants, like bacteria or lead, may need a lab test for an accurate result. Your technician will explain exactly what your test covers.

Your technician walks you through the results in plain language. If your water needs treatment, you’ll get clear options and upfront pricing before anything is done.

It’s any system that improves the water coming into your home, like a water softener, filtration, reverse osmosis, an iron filter, and more. The right one depends on what’s in your water.

There are two main types. Whole-home systems treat all the water entering your house. Point-of-use systems, like under-sink filters, treat water at a single faucet.

Filtration catches particles and specific contaminants as water passes through filter media. Purification goes further, usually with methods like reverse osmosis or UV treatment, to target dissolved contaminants and microorganisms.

That’s often iron bacteria, which feed on iron in your water. Treating it may take a well disinfection along with an iron filter to keep it from coming back.

Most are installed under the kitchen sink and supply drinking water through their own dedicated faucet. Many can also be connected to your refrigerator’s water and ice line.

A properly sized system shouldn’t noticeably affect your water pressure. If pressure drops over time, it’s usually a sign the filter is due for a change.